Record One Programme While Watching Another
If your recorder is connected to the TV via AV connection, . . . . . . press TV/VCR. The recorder's VCR indicator and the TV broadcast being recorded disappear.
SELECT CHANNEL TO WATCH
1
Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.
� The programme selected with the TV�s channel controls appears on the TV screen while the one selected with the recorder's TV PROG. buttons is recorded on the tape. � If a decoder is connected to the recorder ( pg. 35), you can select a scrambled channel as well with the TV channel controls.
TV PROG. COUNTER RESET
Elapsed Recording Time Indication
You can check the exact time of a recording.
DISPLAY
2
SET COUNTER DISPLAY
1 4 7
2 5 8 0
3 6 9
4
1 2
TV PROG.
Press DISPLAY until a counter reading appears on the dispay panel.
RESET COUNTER
Press C.(COUNTER) RESET before starting recording or playback. � The counter is reset to �0:00:00� and shows the exact elapsed time as the tape runs.
C.RESET
T V
3
Tape Remaining Time
DISPLAY REMAINING TIME
1
1
Press DISPLAY until the time remaining on the tape appears. � By pressing the DISPLAY button, you can change the display to show the counter reading, channel position*, clock time or tape remaining time.
* channel position is not displayed during playback.
NOTE:
Depending on the type of tape used, there may be times when the tape remaining time reading may not appear right away, or is not correct. "- - : - -" may sometimes appear, or the display may blink on occasion.