2
SITUATE AND CONNECT YOUR NEW VCR
5 After completing the basic connections:
� If you�re using a Cable Box, . . . . . . go to 2b (CATV CONVERTER CONNECTION) . � If you�re using an AV connection, . . . . . . go to 2c (AUDIO/VIDEO CONNECTIONS). � If you�re using an RF connection only, . . . . . . go directly to 3 (PLUG & PLAY).
b�CATV CONVERTER CONNECTION
CATV Input CATV Input To TV TV VCR TV VCR To TV
OUT
ANTENNA IN TV OUT
3
From VCR
IN
SET YOUR VCR'S CLOCK AND TUNER
a�BASIC ANTENNA/CABLE CONNECTION
1 Place the VCR on a stable, horizontal
surface. 2 Disconnect your antenna or cable line from your TV. 3 Connect your antenna to your VCR. 4 Connect your VCR to your TV.
OUT
IN
Cable Box
ANTENNA IN
PLUG & PLAY
The VCR�s clock and tuner channels are set automatically when the VCR is plugged into the AC outlet. If you use a cable box, Plug & Play will not function; set the clock and tuner channels separately. ( pg.10 � 14 of the HR-S9800U�s instruction manual)
From Cable Box
TV OUT
Cable Box
With this connection you can view/record any cable channel including scrambled channels to which you have subscribed. To watch TV with this type of connection 1 Press TV/VCR on the Remote so that the VCR
mode indicator lights on the front display panel. 2 Tune TV to VCR output channel (3, 4 or AV mode). 3 Tune VCR to Cable Box output channel. 4 Select desired channel on Cable Box. �You can only view the channel you are recording.
With this connection, you can view one scrambled cable channel while recording another unscrambled channel. To watch TV with this type of connection 1 Press CH 5� (+/�) or Number keys to select 2 Press TV/VCR so that the VCR mode indicator 3 goes off from the front display panel. Tune TV to Cable Box output channel. 4 Select desired channel on Cable Box. � You cannot record scrambled channels. � To play back a tape, you must tune the
Cable Box to the VCR output channel. desired channel for recording.
1
Plug the VCR into the AC outlet.
4
RF CONNECTION
Back of VCR (example only) COMBINED VHF/UHF
ANTENNA IN TV OUT
VHF/UHF
Back of TV (example only)
During Auto Channel Set, the channel numbers are displayed as they are scanned and set. Receivable channels are automatically stored
2
in memory in the order of their frequencies, and non-receivable channels are skipped.
SEPARATE VHF/UHF
5
VHF ONLY
VHF UHF
c�AUDIO/VIDEO CONNECTIONS
AV connection methods differ from one type of VCR to another. First, for any TV and VCR, connect your VCR to your TV using RF connection. Then make AV connections following one of the methods illustrated here. After making the connections, go to 3 (PLUG Hi-Fi VHS VCR AV STEREO TV
Do not press any buttons on the VCR or on the Remote during Auto Setup. When setting is complete, the VCR displays the current clock time. You can now use your VCR.
UHF ONLY
3
VIDEO IN L AUDIO IN R
VHF UHF
VIDEO OUT L AUDIO OUT R
CABLE TV LINE Note: Exact connector positions and names may differ.
& PLAY).
MONAURAL VHS VCR AV TV SUPER VHS VCR AV STEREO TV WITH S-VIDEO INPUT TERMINALS
S-VIDEO OUT S-VIDEO IN VIDEO IN L AUDIO IN R VIDEO IN AUDIO IN VIDEO OUT L AUDIO OUT R
�AUTO� blinks while the VCR automatically sets the clock using information provided by the local PBS channel. NOTES: � If the clock time displayed in 5 is incorrect, perform the Semiauto or Manual Clock Set procedure (refer to page 11 or 12 of the HR-S9800U�s instruction manual). Auto Channel Set has already taken place, and is not affected. � There are some PBS channels that do not transmit clock setting data. If your antenna cable is properly connected and �� � : � �� is displayed, perform the Manual Clock Set procedure (refer to page 12 of the HR-S9800U�s instruction manual). Auto channel setting has not yet taken place, so perform the Auto Channel Set procedure (refer to page 13 of the HR-S9800U�s instruction manual).
� CONNECTORS WHICH ARE OR MAY BE REQUIRED:
RF Cable 300-75 ohm Matching Transformer VHF/UHF Antenna Mixer
VIDEO OUT AUDIO OUT
Antenna Splitter
Antenna Splitter
To Listen To VCR Sound Through A Component Stereo Audio System, Connect As Shown
VCR
VIDEO OUT L AUDIO OUT R
Monaural deck owners: Connect to VCR's AUDIO OUT
TV
AMP
