Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 33 (kliknij aby zobaczyć)
33
Recording
V T V I D E O
2 2
Record One Program While Watching Another
ENGAGE TV MODE
1
q 5/8 6
During recording... � If using the RF connection ( pg. 6), press TV/VIDEO. The VCR's VIDEO indicator goes out and the TV broadcast being recorded disappears. � If using the AV connection ( pg. 6), change the TV's input mode from AV to TV.
SELECT CHANNEL FOR VIEWING
2
OSD
1 4 7 2 5 8 0 3 6 9
Use the TV�s channel selector to set the channel you want to watch.
Display Elapsed Recording Time
RESET COUNTER TO ZERO
Before recording starts, press C.RESET. The counter
1
/
C.RESET
resets to zero and displays the exact elapsed time as the tape runs.
DISPLAY ELAPSED TIME ON SCREEN
2
During recording, press OSD at any time to see the elapsed time. All indications corresponding to the current status of the VCR are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. Press OSD again to remove the display. � Make sure "SUPERIMPOSE" is set to "ON" ( pg. 26).
