jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 13 (kliknij aby zobaczyć)
PRACTICAL SERVICE FIGURE
<TUNER SECTION>
Sensitivity : (IHF, THD 3%) FM Less than 17dB [at 87.5MHz] Less than 17dB [at 98.1MHz] Less than 17dB [at 108.1MHz] TV<591YU ONLY> Less than 19dB [at 2ch] Less than 19dB [at 4ch] Less than 19dB [at 7ch] Less than 19dB [at 10ch] Less than 19dB [at 13ch] WEATHER<591YU ONLY> Less than 19dB [at 2ch ] (S/N 10dB) AM Less than 57dB [at 630kHz] Less than 56dB [at 1000kHz] <YU ONLY> Less than 56dB [at 999kHz] <EXCEPT YU> Less than 56dB [at 1440kHz] S/N Ratio : FM More than 51dB [at 87.5MHz] More than 51dB [at 98.1MHz] More than 51dB [at 108.1MHz] AM More than 25dB [at 630kHz] More than 25dB [at 1000kHz] <YU ONLY> More than 25dB [at 999kHz] <EXCEPT YU> More than 25dB [at 1440kHz] Intermediate frequency : FM 10.7MHz ± 0.1MHz AM 450kHz ± 3kHz FM stereo separation : More than 17dB [at 98.1MHz]
<TAPE SECTION>
Tape speed : Wow & flutter : Distortion : Take-up torque : Back tension: F.F torque : Rew torque : S/N ratio : Noise level : 3000Hz ± 60Hz Less than 0.55% Less than 3.0% 30g-cm-6/+15g-cm(FWD) 30g-cm-6/+15g-cm(RVS) 2.5g-cm-1.0/+1.5g-cm(FWD) 2.5g-cm-1.0/+1.5g-cm(RVS) 110g-cm±40g-cm 110g-cm±40g-cm More than 43dB Less than 4.0mV (Vol MAX, without tape) Less than 0.3mV (Vol MIN, without tape) 63Hz � 3.5/±4.0dB ~ 8kHz � 0/± 4 dB(NORM) 63Hz � 3.5/±4.0dB ~ 8kHz � 0/± 4 dB(CrO2, METAL) TTA� 100 TTA� 210 TTA� 310(70us) TTA� 320 (120us)
