Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 13 (kliknij aby zobaczyć)
CONNECTING THE SUBWOOFER
TURN OFF ALL POWER...
There are several ways to connect your subwoofer. Read this section carefully to determine which method is best suited for your installation. The subwoofer may be fed directly with a low-level signal taken from your receiver�s subwooferoutput to connect your subwoofer. Connect one end of each stereo pair of leads to your receiver/ processor�s left and right outputs and connect the other end to the corresponding left and right LOW-LEVEL INPUTS � on the subwoofer. This cable is included with the system.
SUBWOOFER OUTPUT L R
Figure 10.
LEFT
+L�
SPKR In
�R+
Low-Level In
L
SPKR Out
R
SUBWOOFER RIGHT
SUBWOOFER OUTPUT
NOTE: If your receiver/processor has only one subwoofer output, it is recommended that you use the supplied �Y�-connector as shown.
Y-Connector LEFT
+L�
SPKR In
�R+
Low-Level In
L
SPKR Out
R
SUBWOOFER RIGHT
HTS-10 Home-Theater System � Owner�s Manual x 13
