Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 84 (kliknij aby zobaczyć)
SET UP menu
You can choose a signal source to be output from the EXT-2 terminal. You can do this with the output signals of the devices connected to other EXT terminals, or with the picture and sound from a TV channel you are currently viewing. 1 Press the 5 buttons to choose the arrow from the menu
> EXT SETTING EXT-1 EXT-3 EXT-5 TV EXT-4 DUBBING EXT-2
DUBBING
TV: The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal. � During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal. � When you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a device connected to the EXT terminal onto a VCR connected to the EXT-2 terminal. � The RGB signals from the TV games cannot be output. Teletext programmes cannot be output.
OK
D0022-EN
2 Press the 6 buttons to choose an EXT terminal or TV. Then press the a button The arrow in the menu represents a signal flow. The left side of the arrow shows a signal source output from the EXT-2 terminal. EXT-1/EXT-3/EXT-5: The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT-2 terminal.
