|
Kto jest w sklepie?
Sklep przegląda 5845 gości
|
Kategorie
|
Informacje
|
Polecamy
|
|
|
|
|
Dla tego produktu nie napisano jeszcze recenzji!
Synchronized Recording
By using Synchronized Recording, you can start and stop both disc play and tape recording at the same time. Everything on the disc goes onto the tape in the order it is on the disc, or according to the order you have made for Program Play.
4
Press CD REC START.
CD REC
START
�CD REC� appears on the display and the REC (recording) lamp flashes when recording starts. The cassette deck starts recording when the CD player starts playing. When the recording is done, �CD REC FINISHED�
On the unit ONLY:
1
Press 0 EJECT and insert a recordable cassette with the exposed part of the tape down.
scrolls on the display, and the REC (recording) lamp turns off. Both the cassette deck and the CD player stop automatically. To stop recording, press 7 to create a 4-second blank portion on the recording tape. (Remember a 4-second blank is important when using Music Scan�see page 20.)
T U G NIN
/BEEP
To record on both sides�Reverse Mode
On the unit ONLY:
Press REVERSE MODE so that the Reverse Mode indicator on the display lights up like� .
REVERSE MODE
2 3
Load a disc. Select a disc.
For audio CDs:
Press the corresponding disc number button (CD1 � CD5) where a disc is loaded in step 2, then press 7.
CD1 CD2 CD3 CD4 CD5
� When using the Reverse Mode for Synchronized Recording, start recording in the forward (3) direction first. When the tape reaches its end while recording a song in the forward direction (3), the last song will be rerecorded at the beginning of the reverse side (2). If you start recording on the reverse side (2) first, recording will stop when only one (reverse) side of the tape is recorded. To cancel Reverse Mode, press the button again so that the Reverse Mode indicator lights up on the display like� .
/BEEP
For MP3 discs:
You can select a track to start recording with. 1) Press the corresponding disc number button (CD1 � CD5) where a disc is loaded in step 2, then press 7.
CD1 CD2 CD3 CD4 CD5
When making Sleep Timer settings while doing Synchronized Recording Set enough time to allow for the disc to finish playing; otherwise, the power will go off before recording is completed.
2) Turn ¢ / 4 to select the group, then press CD 3¥8.
PRESET
CD
3) Turn ¢ / 4 to select the track.
22
English
T U G NIN
T U NIN G
$4.99 HX-Z10 JVC Schematy Zestaw schematów dla tego urządzenia. Plik PDF zawierający schematy będzie dostarczony na Twó… $4.99 HX-Z10 JVC Katalog Części Katalog części w formie pliku PDF. Plik zawiera wykaz części znajdujących się w urządzeniu wr…
|
|
|
> |
|