|
Dla tego produktu nie napisano jeszcze recenzji!
Applying the melting effect � F1 (MELT) Use the following procedure.
1 2
Press F1 (MELT), turning it on. Set the �Transition� parameters. � Left knob (�Trns�): degree of transition (0 to 100%) � Center knob (�Curv�): degree of stretching the image (0 to 100%) � Right knob (�Rndm�): degree to which the melted portion is jagged (0 to 100%)
Selecting the shape of the portion beginning to melt � F2 (PATTERN) Use the following procedure.
1 2
Press F2 (PATTERN), turning it on. Adjust the parameters for the following items.
Setting Knob adjustments of parameters Select the shape Left (�Amp�): size of the waves (0 to of the portion 100%) beginning to melt. Center (�Freq�): degree of fineness of the waves (0 to 100%) Right (�Sped�): phase offset of the waves (�16 to +16)
Item �Border�
�Slant angle�
Set the angle of the boundary.
Right knob (�Angl�): boundary direction (�100 to +100%)
Moving the waves at the melting boundary � F3 (LOCK) Use the following procedure.
1 2
Press F3 (LOCK), turning it off. Adjust the �Border� parameter. � Right knob (�Sped�): direction and speed of wave movement (�100 to +100%)
Chapter 5
Special Effects Operations
5-95
|
