Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 9 (kliknij aby zobaczyć)
ICD-B200RS
3-3-8. Reset menu The reset menu is used to initialize menu contents. When this mode is selected, the initial screen for reset menu displays the characters �RST MENU�. Pressing of Bx key during �RST MENU� character display will cause the menu information to be initialized. The reset menu includes the following items:
MENU item REC MODE VOR CONTINUE ALARM BEEP SET DATE Initial setting SP OFF OFF OFF ON No setting
Initial screen for KEY TEST
KEY TEST screen
Initial screen for RESET MENU
STOP
Initialization of MENU contents
Note: The display remains unchanged when the MENU is being reset.
DISPLAY
VOLUME+
VOLUME�
3-3-9. KEY test The key test is intended to check whether any key pressed is recognized or not (AD misdetection check). When this test mode is selected, the initial screen for key test displays the blinking characters �KEY TEST�. By pressing the Bx key while the �KEY TEST� characters are blinking, the characters �PLAY� will be displayed entering the key test screen. Once the key test is started, the test will not be completed until all of keys are pressed. To exit from the key test mode, turn the power off (remove the power cord). The key test includes the following key tests:
KEY name xSTOP Bx >+ .� zX MENU DISPLAY VOLUME� VOLUME+ FOLDER ERASE DIVIDE LCD display STOP PLAY FF REW REC MENU DISP VOL M VOL P FOL ERASE DIVIDE
MENU
DIVIDE
FOLDER
ERASE
All of keys or switches completed to be pressed.
FlashMemory being accessed Completed (Initialization of MENU information)
