Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
Setting DIP Switches
(continued)
4 AUDIO LEVEL METER function settings (Only for IF-C51SD1G)
Set the AUDIO LEVEL METER display on/off, and its other various settings. 7 LEVEL METER ch: Set the combination of audio channels displayed with the AUDIO LEVEL METER. Settings OFF 1:2 12:34 31:24 123:456 1-8 S0402 [1] OFF OFF OFF OFF ON ON Switch No. S0402 [2] OFF OFF ON ON OFF ON S0402 [3] OFF ON OFF ON OFF OFF
NOTES: � Numbers indicate the audio channel. The channel input level indicated on the left side of �:� is displayed on the left side of the screen, and the channel input level indicated on the right side of �:� is displayed on the right side of the screen. � The AUDIO LEVEL METER display does not appear when this item is set to �OFF.� � When �1-8� is selected, the channel input level for 1, 2, 3 and 4 is displayed on the left side of the screen, and the channel input level for 5, 6, 7 and 8 is displayed on the right side of the screen.
7 BAR TYPE: Set the Level Meter color. Settings W. 100 W. 50 3COLORS
NOTES: � For �W. 100� and �W. 50,� the line indication for the standard input level set in the �REFERENCE LEVEL� is displayed. Input level set in the �OVER LEVEL� is not displayed. � As for the audio channel bar display with no signal input, white is displayed for the �3COLORS� setting, and gray is displayed for other settings.
Switch No. S0402 [7] S0402 [8] OFF ON ON OFF OFF OFF ON ON
W. 100: White color display W. 50: White (half transparent) display 3COLORS: The AUDIO LEVEL METER display uses three different colors (red, yellow and green) to indicate variations in input levels. Displayed when the audio input is at the same level set in �OVER LEVEL� or
Red:
higher. Yellow: Displayed when the audio input is at the same level set in �REFERENCE LEVEL� or higher. Green: Displayed when the audio input is lower than the level set in �REFERENCE LEVEL.�
