|
Dla tego produktu nie napisano jeszcze recenzji!
®������®
Super JV Synthesizer
JV-1080
TurboStart
Sequencing
The JV-1080 is a 16-part multitimbral instrument. There are 64 preset performances and 32 user performances. To select a performance: 1. Press PERFORMANCE. 2. Press USER/CARD or PRESET to choose a performance bank. 3. Turn the VALUE dial to select a performance. To change a patch for a part, or adjust levels, panning and other part parameters: 1. Press PARAMETER. 2. Press PART (written in blue)�you can now see the patch currently selected for this part. 3. To access the patches for other parts, press PARAMETER again, turning it off. Now you can use the 8 PART SELECT buttons (written in blue) to choose which part you want to edit. The 1-8/9-16 button will choose between Parts 1 through 8 or 9 through 16, respectively. 4. You can select other part parameters by pressing PARAMETER again and then pressing any PERFORMANCE EDIT button written in blue (i.e. COMMON, EFFECTS, MIDI, etc). 5. You can also press the PALETTE button to view the parameter setting for Parts 1-8 or 9-16.
Using the JV-1080 for General MIDI
The Super JV contains all of the sounds required by General MIDI. They are found in Preset Bank D. If you want to play GM sequences through the JV-1080, you can quickly set up all 16 parts for General MIDI by doing the following: 1. Press and hold SHIFT. 2. Press GM. 3. To exit GM mode, press the PERFORMANCE or PATCH buttons.
TBS17
© 1999 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040
Faxback # 20041
Page 2
|
