|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
 ;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
;
...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
FEATURES
The Kappa 54a is a 4-channel power amplifier that offers stereo, bridged-mono, or tri-mode operation, and is rated at 50 watts (rms) per channel into a 4-ohm load. In a bridged-mono configuration, front and rear amplifiers can deliver up to 150 watts (rms) for the same load. The 54a also features: � � � � � � � � � � � 2-ohm operation, rated at 75 watts (rms) per channel Bridge/stereo switches for fast system setup Built-in 12 dB-per-octave electronic crossovers, variable from 32 to 320 Hz Individually selectable high- and low-pass filters for all outputs (with throughpass on amplifier outputs and front/rear sum on auxiliary outputs) Amplifier input sensitivity controls to match a wide range of input signal levels from 250 mV to 9 V Five protection levels guard against over-voltage, undervoltage, over-power, over-temperature, and over-current situations 2-color LED array indicates green when power is on and orange when protection is activated Industrial-grade, gold-plated, �pre-wire and plug-in� connectors for an easy-toinstall high-quality interface Transparent control cover to deter tampering yet provide a clear view of installation settings Built-in automotive type fuses to protect the amplifier Unibloc� chassis provides improved heat-sink capacity and exceptional RFI shielding characteristics
3
|
