Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 8 (kliknij aby zobaczyć)
Installation
Fig.4 � Connect an extraction pipe to the connection ring on the hood and, whilst you inserting the hood into the cabinetry, check that the extraction pipe and the electrical wire come out of the hole made in the top of the cupboard. � Attach the hood to the bottom of the cupboard with 8 screws. The frame on the box has more than 8 slots for passing the screws through, use the most suitable ones for your installation making them as equidistant as possible. Fig. 5 � Remove the grease filter and hook the filter support frame onto the hood. At this stage connect up the electrics on the control panel and the lights. � Hook the filter support frame onto the hood (snap fitting onto the two side seals). � Refit the grease filter.
