KENWOOD KDC416S
Instrukcja Obsługi

Tuner features
English
Auto Memory Entry
You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to six frequencies can be stored this way. The 4 button moves the cursor to the left, and the ¢ button to the right.

6 Press the FM or AM button to display the desired character.
Characters that can be displayed are as follows. Alphabet : A ~ Z Numerals and symbols : 0~9 @ " � ` % & * + - = , . / \ < > [ ] the name.

1 Select the band for auto memory entry. 2 Press the AME button for at least two seconds to start auto
memory entry. The numbers of the preset station buttons are shown in order. When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner then plays the last station received. Recalling a Preset Station: Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed.

7 Continue steps 5 and 6 until all the characters are chosen for
NOTE

You can enter up to eight characters for each name.

8 Assigning Names
Press the MENU button. The name of the station is stored in memory, and the Station Name Preset mode ends. Also, if you make no input for 10 seconds, the name will be stored up to the point that you have entered, and the mode ends.
NOTE

Function of the KDC-416S

Station Name Preset (SNPS)
You can assign names to radio stations with the Station Preset Memory. Up to 18 FM stations and 16 AM stations can be assigned names.

� You can assign names to up to 18 FM stations and 16 AM stations. � All the station names will be erased if you press the Reset button. � If you want to change the name of a station, first display the name of the station (following steps 1 to 4 above), then change the letter(s) that you want by following steps 5 and 6.

1 Adjust the frequency to the station whose name you want to
enter.

2 Enter the menu mode
Press the MENU button for at least one second. "MENU" is displayed when the menu mode is entered. Function of the KDC-416S

3 Press the FM or AM button to select the display "NAME SET" . 4 Press either the 4 or ¢ button for at least two seconds to
enter the station name preset mode. The cursor will blink in the position where letters are entered.

Switching Display for Tuner
You can change the display used when listening to the radio. Changing the Display: Each time you press the CLK button, the display changes as follows:

5 Press either the 4 or ¢ button to move the cursor to the
desired position.

� 14 �