Tuner features (See page 6)
English
K2I ( Kenwood Intelligent Twin IF)
When the frequency of another station is too close to that of the station currently being listened to, interfering with proper reception, this function automatically narrows the range of received frequencies to prevent such interference.
Tuning 1 Press the SRC button repeatedly until the tuner mode is
obtained. "TUNER" is displayed only when the tuner mode is selected.
2 Press either the FM or AM button to select the band. Selecting Tuning Mode
You can choose from three tuning modes: auto seek, preset station seek, and manual. The �AUTO 1� indicator lights up when auto seek tuning is selected, and the �AUTO 2� indicator lights when preset station seek tuning is selected. Each time you press the FM button, the band switches between the FM1, FM2 and FM3. Press the AM button to select the MW and LW bands. 3 � Auto Seek Tuning Press the ¢ button to seek increasing frequencies. Press the 4 button to seek decreasing frequencies. � Preset station seek tuning Press the ¢ button to move to the next preset station (i.e., the one with the next highest number), and the 4 button to move to the last preset station (i.e., the one with the next lowest number).
NOTE
1 Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on. 2 Press the ¢ button repeatedly until the tuning function appears in the display. Press the 4 button to search in the other direction. The tuning method is displayed as �AUTO 1�, �AUTO 2�, or �MANUAL� referring respectively to auto seek tuning, preset station seek tuning, and manual tuning. 3 Switching settings Press either the AM button or FM button to switch the tuning mode. The display and setting will change.
4 Press the MENU button to end the menu mode.
If the frequencies stored at the preset numbers receive stations which were not originally memorized when traveling long distances, the preset number is not displayed. In such cases, pressing the 4/¢ button to use preset station seek will receive channel 1. � Manual Tuning Press the ¢ button to increase the frequency by one step. Press the 4 button to decrease the frequency by one step.
NOTE
The ST indicator lights up when stereo broadcasts are being received.
