JVC KDS743R/KDS741R
Instrukcja Serwisowa

KD-S743R/KD-S741R

2.2.18 Removing the turn table / spindle motor (See Figs.41 and 42) � Prior to performing the following procedure, remove the top cover, connector board, chassis unit and clamper assembly. (1) Remove the two screws L attaching the spindle motor assembly through the slot of the turn table on top of the body. (2) Unsolder the wire on the connector board if necessary.

Turn table

L

Fig.41

L

Turn table

Spindle motor Fig.42

1-22 (No.49810)