Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 4 (kliknij aby zobaczyć)
KD-S9R
Disassembly method
Removing the front panel unit (See Fig. 1, 2)
1.Press the Eject button to open the front panel unit 2.Push and open the right and left open/close shaft arms outward to remove the shaft. 3.Remove the front panel unit from the same side as the shaft was removed.
Front panel unit Eject button
Fig 1
Removing the front chassis assembly (See Fig. 3, 4)
1.Remove the front panel unit. 2.Remove the two screws A attaching the front chassis assembly. 3.Remove the four ribs a attaching the front chassis assembly to the chassis. Open/close shaft arm
Fig 2
A Fig 3
Fig 4 a
a
b Removing the bottom cover assembly (See Fig. 5)
Turn the unit upside down,then insert and turn to b the screwdriver to remove the bottom cover.