Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 31 (kliknij aby zobaczyć)
Adjusting Parametric EQ
1 Follow steps ~ to ! on page 28.
� In step Ÿ, select �Parametric.�
5 Select the frequency (adjustable
between 20 Hz � 20 kHz).
2 Select the band�Band1/2/3.
� Band 1/2/3 are required to be preset at least 5 steps (frequencies) away from each other. (Only selectable frequencies are shown on the display.)
Ex.: When �1 kHz� is selected for �Band2�
Band1: Low band (20 Hz to 1.2 kHz) Band2: Mid band (80 Hz to 5 kHz) Band3: High band (315 Hz to 20 kHz)
3 Adjust the enhanced level for the
selected band within the range of �10 to +10. 0.7/1/2/3/4/5.
Not selectable
6 Select the band width (Q)�
4
� To adjust the other bands, press BACK. Then repeat steps 2 to 6.
7 Finish the procedure.
� Once you have made adjustments, it is memorized. The memorized setting is recalled next time you select Parametric EQ.
