Installation
Installation using the Brackets
Tapping Screw 5
..........1 2
..........1 3
Bracket 3 Semusu Screw 4
Installation using the velcro tapes ..........2 4
..........5 5
Carpet Velcro tape 6
..........4 6
� Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. � Do not install the unit to an unatable place and a place where it vibrates. � You can mount the unit at any angle between the regular horizontal position and the vertical position on its back (0° through 90°). You cannot mount the unit with the disc slot facing downwards, angled or upside down.
..........2 7
..........1
� If the fuse blows, first make sure that the wires have not caused a short circuit, then replace the old fuse with one with the same rating.
