BLAUPUNKT KEY WEST CD169
Instrukcja Obsługi

Radio Reception
Seek Tuning 1. Press the Preset Scan Tuning 1. Press the to select the desired band. 2. Hold the pressed for more than 2 seconds.
BND / TS SC/PS

BND / TS

to select the desired band.

FM 1 § FM 2 § FT § AM § AT FT & AT are Travel Store bands.

Receiving the Memorized Stations 1. Press the to select the desired band. 2. Press the - momentarily.
BND / TS 1 6

2.

Press the TUN/ TRK to tune in stations. Tuning automatically stops at a broadcasting frequency. � SEEK � indicator will appear on the display window. When tuned in to FM stereo broadcasting stations, the � � stereo signal indicator will appear on the display window.

� SCAN � indicator will appear on the display window. The unit will scan preset memory for the 12 stations from the AM/AT band or the 18 stations from the FM 1/FM 2/ FT bands. The unit will stop at each preset station for 8 seconds, before continuing to the next preset station. Press the SC/PS again to stop Preset Scan Tuning and remain this on the selected frequency.

Local/Distant (LO/DX) Selection
This feature is used to select the strength of the signals at which the radio will stop during Seek Tuning. Press the MUTE / SENS for more than 2 seconds to select the Local setting and only strong (local) stations will be received. The � lo � indicator appears on the display window. Pressing again will select the Distant setting and the radio will stop at a wider range of signals, including weaker more distant stations. The � lo � indicator will go out on the display window. DX is the suggested default setting.

Manual Tuning 1. Press the 2.

Memorizing Stations Automatically (Travel Store)
to select the desired AM or FM band.

BND / TS

Press the TUN/ TRK or TUN/ TRK for more than 0.5 second to activate the manual tuning mode. Press again to tune in to stations. � MANUAL � indicator will appear on the display window. After 4 seconds of completing Manual Tuning, the tuning control will revert to the Seek Tuning mode.

1. 2.

Press the

BND / TS

to select the desired band.

Hold the BND / TS pressed for longer than 2 seconds. Up to 6 stations with strong signals will be automatically stored in preset memory for the selected band.

Note
This function is available for FT and AT.

Scan Tuning 1. Press the 2. Hold the

Memorizing Only the Desired Stations
You can store up to 6 stations on each band (18 for FM 1, FM to select the desired band. 2 and FT, 12 for AM and AT) in the order of your choice. pressed for less than 2 seconds.

BND / TS

SC/PS

The unit will scan the selected band for stations. � SCAN � indicator will appear on the display window. Press the SC/PS again to stop Scan Tuning and remain this on the selected frequency. Tip While tuning, the pie-shaped signal-strength meter on the display is lit differently depending on the strength of the signal. While scanning bands, the pie-shaped signal-strength meter spins. While playing CD�s, this display

1. 2. 3.

Press the Press the

BND / TS
TUN/ TRK

to select the desired band. to tune in stations.

Press and hold the desired preset memory button 1 6 for about 2 seconds until the frequency indicator flashes twice. The number of the pressed preset memory button appears on the display window.

Note
If when you store another station on the same preset number button, the previously stored station is replaced with new one.

spins also.

E-4