jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 51 (kliknij aby zobaczyć)
KP-53XBR300/61XBR300
RM-Y902 RM-Y902
[GREEN REGISTRATION ADJUSTMENT]
<GREEN CENTER, SIZE> 1. Select GRN CENT or GRN SIZE with the 1and 4 keys on the remote commander. 2. Adjust the crosshatch line goes center horizontally (GRN CENT) and set the size correctly (GRN SIZE) with the joystick on the remote commander.
<FINE ADJUSTMENT> 1. Press 9 key on the remote commander to shift to the fine adjustment mode. The green marker (in the GRN mode) appears on the center of the screen. 2. Use the 1and 4 keys or the joystick on the remote commander, move the marker (see below) everywhere you want to adjust and adjust with the joystic keys on the remote commander.
GRN CENT
000
000
Marker movement by the 1 and 4 keys:
<GREEN SKEW> 1. Select GRN SKEW with the 1and 4 keys on the remote commander. 2. Adjust the crosshatch line goes straight vertically and horizontally with the joystick on the remote commander.
Press once the joystick the marker turns sreen to white. Then you can move the marker up and down left and right.
GRN SKEW
000
000
3. Press 9 key on the remote commander to shift to the rough adjustment mode. <GREEN PINCUSHION> 1. Select GRN PIN with the 1and 4 keys on the remote commander. 2. Adjust the crosshatch line goes straight vertically and horizontally with the joystick on the remote commander.
