SONY KP61S70
Instrukcja Serwisowa

Watching Two Programs at One Time � PIP
The Picture-in-Picture (PIP) feature allows you to view two channels simultaneously, one in the full size �main� picture and one in a smaller �window� picture.
PIP

Using the Yellow Labeled Buttons for PIP Operations
Press to display a window picture. Each time you press this button, the picture size will change (1/9 n1/16 nno display). To close the window picture, press PIP repeatedly until it disappears.
POSITION

You can move the window picture to any location on the screen.
The symbol �b� or �B� indicates which picture's TV channel or input source can be changed. The symbol ��� indicates which picture's sound is being received.
6

Press POSITION repeatedly to change the location of the window picture (counterclockwise) around the main picture. You can also change the location by pressing the V, v, B or b button. The window picture moves in the direction of the arrow indicated on the pressed button.

or

Main picture

TV channel or inputsource mode for the main picture* (yellowgreen-colored) TV channel or inputsource mode for the window picture* (white-colored)

10

ACTIVE

Press to select either the main or window picture in order to change the TV channel or video source using the white labeled buttons below. The symbol �b� (or �B�) will appear to indicate which picture�s channel or input mode can be changed.

Window picture

TV/VIDEO

* It will dim in about 3 seconds.

(white labeled button)

Press repeatedly to scroll through the available video inputs for the picture on which the symbol �b� (or �B�) is displayed. (see �TV/VIDEO� on page 17)

Tip

z

If you press RESET in PIP mode, the window picture will move to the bottom right (factory-preset location).

19

Using Your New Projection TV (continued)
Using the Yellow Labeled Buttons for PIP Operations
CH

JUMP

or

0-9
and ENTER

or

Press to select the TV channel on which the symbol �b� is displayed. (for details, see �Watching the TV� on page 16) Speed Surf 1 Press and hold CH + or � to change the channel number rapidly. 2 Release to display the desired channel.

REFER TO THE ILLUSTRATION OF THE REMOTE CONTROL ON THE INSIDE FRONT COVER OF THIS MANUAL AS YOU REVIEW THIS CHART

(white labeled button)
ANT

Press to change between the VHF/UHF input and the AUX input for the picture on which the symbol �b� (or �B�) is displayed.

(white labeled button)
AUDIO

Note: � If one of the pictures received through PIP is snowy, the entire screen may become unstable. In this case, erase the snowy channel. (see �Channel Skip/ Add� on page 27)

Press to alternate sound between the main picture and the window picture. The symbol � � will appear for a few seconds to indicate which picture�s sound is being received. This is useful when you need to copy down information of the main picture. Press to freeze the desired scene in the main picture. The frozen picture is displayed in the window picture while viewing the normal picture in the main picture. The window picture size is automatically changed to 1/9 if it was 1/16. Press again to resume normal PIP viewing. Press to switch the audio and video of the main picture and the window picture. Each time you press SWAP, the picture and sound of the two will be exchanged.

FREEZE

SWAP

20

� 18 �