|
|
|
Kto jest w sklepie?
Sklep przegląda 5733 gości i
2 zarejestrowanych klientów |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Dobrej jakości skan - wkońcu mogłem poznać wszystkie funkcje tego odtwarzacza - polecam .
;
Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Listening to radio broadcasts
Presetting radio stations manually
The RDS auto memory function assigns preset numbers to RDS stations starting from preset number �01�. Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations. �Presetting RDS stations (RDS AUTO MEMORY)�.$
Receiving preset stations
1Use the input selector (INPUT SELECTOR) to select
the tuner. 2Using the remote control unit, enter the number of the preset you want to receive (up to �30�).
Press the numeric keys in the following order: For �15�, press .......... 0,5 For �20�, press .......... 0,0,) � If you make a mistake entering a two digit number, press the 0 key several times to return to the original display and start again.
15
1Tune to the station you want to store. 2Press the MEMORY key while receiving the station.
Proceed to step 3 within 5 seconds. (If more than 5 seconds elapse, press the MEMORY key again).
� When storing radio stations manually, it may take a few seconds before the �MEMO� indicator appears in the display after pressing the MEMORY key depending on receiving conditions.
Blinks for 5 seconds Lights for 5 seconds
SP. A B FM MEMO
SP. A B FM
STEREO
15
9 ). ) )
TUNED AUTO MHz
Receiving preset stations in order (P.CALL)
1Use the input selector (INPUT SELECTOR) to select
the tuner.
01
8 9. ) )
STEREO TUNED AUTO MHz
3Use the MULTI CONTROL to select one of the station
presets (1 � 30). 4Press the MEMORY key to accept the setting.
2Use the P.CALL key to select the desired station.
� Each time you press the P.CALL key, another preset station is received in order. Pressing the P.CALL (¢) key does the following: 01=02=03= ....28=29=30=01=02=03=
� Repeat steps 1, 2, 3 and 4 to store as many stations as necessary. � If you store a station at a previously used preset, the old station will be replaced by the new one.
Pressing the P.CALL (4) key does the following: 01+02+03+....28+29+30+01+02+03+
Holding down the P.CALL key, lets you skip through the presets, receiving each for 0.5 seconds apiece.
Other Operations Preparations
|
|
|
> |
|
