KENWOOD KRFV6010
Instrukcja Obsługi

Listening to radio broadcasts
KRF-V7010/V6010/V5010 (En/T)

Presetting radio stations manually
The RDS auto memory function assigns preset numbers to RDS stations starting from preset number "1". Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations. �Presetting RDS stations (RDS AUTO MEMORY)�. *

19
2 Enter the number of the preset you want to receive (up to
"30").
Press the numeric keys in the following order: For "15", press .......... 0,5 For "20", press .......... 0,0,) � If you make a mistake entering a two digit number, press the +10 key several times to return to the original display and start again.
SP

MEMORY

A

L

R
SW

FM

15

8 9.))
MHz

STEREO

TUNED ST.

AUTO MEMO.

MULTI CONTROL

1 Tune to the station you want to store. 2 Press the MEMORY key while receiving the station.
Proceed to step 3 within 5 seconds. (If more than 5 seconds elapse, press the MEMORY key again). � When storing radio stations manually, it may take a few seconds before the "MEMORY" indicator appears in the display after pressing the MEMORY key depending on receiving conditions. Blinks for 5 seconds
SP

Receiving preset stations in order (P.CALL)

AUDIO P.CALL TUNER P.CALL

Lights for 5 seconds
FM AUTO MEMO. MHz

A

L

R
SW

01

8 9.))
STEREO

ST. TUNED

RC-R0507

RC-R0307

3 Use the MULTI CONTROL to select one of the station
presets (1 � 30).

1 Use the remote control to select the tuner as the source.
� The remote control switches to the tuner operating mode.

4 Press the MEMORY key to accept the setting.
� Repeat steps 1, 2, 3 and 4 to store as many stations as necessary. � If you store a station at a previously used preset, the old station will be replaced by the new one.

2 Use the P.CALL key to select the desired station.
� Each time you press the key, another preset station is received in order. Pressing the P.CALL (%) key (¢) does the following: 01=02=03= ...... 28=29=30=01=02=03= Pressing the P.CALL (�) key (4) does the following: 01+02+03+ ...... 28+29+30+01+02+03+ Holding down the key, lets you skip through the presets, receiving each for 0.5 seconds apiece.

Receiving preset stations

AUDIO 1-0, +10 TUNER

1-0, +10
RC-R0507 RC-R0307

1 Use the remote control to select the tuner as the source.
� The remote control switches to the tuner operating mode.

Operations