MAINTENANCE
ENGLISH
This unit requires very little attention, but you will be able to extend the life of the unit if you follow the instructions below.
To keep the tape clean
To clean the heads
� Clean the heads after every 10 hours of use using a wet-type head cleaning tape (available at an audio store). When the head becomes dirty, you may realize the following symptoms: � Sound quality is reduced. � Sound level decreases. � Sound drops out. � Do not play dirty or dusty tapes. � Do not touch the highly-polished head with any metallic or magnetic tools.
� Always store the tapes to their storage cases after use. � Do not store tapes in the following places: � Subject to direct sunlight � With high humidity � At extremely hot temperatures CAUTIONS: � Do not play the tapes with peeling labels; otherwise, they can damage the unit. � Tighten tapes to remove slack since loose tape may become entangled with the mechanism. � Do not leave a cassette in the cassette compartment after use, as the tape may become slack.
