Repeat the above procedure to store other stations into other preset numbers.
1
Select the band (FM1 � 3, AM) you want to store stations into (in this example, FM1).
FM1 FM2 AM FM3
Notes: � A previously preset station is erased when a new station is stored in the same preset number. � Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.
2
Tune in to a station (in this example, of 92.5 MHz).
Tuning in to a preset station
You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see �Storing stations in memory� on pages 7 and 8.
3
Press and hold the button for more than 2 seconds.
�P0� flashes on the display, showing that the station has been preset.
1
Select the band (FM1 � 3, AM).
FM1 FM2 AM FM3
2
Select the number (1 � 6) for the preset station you want.
Notes: � A previously preset station is erased when a new station is stored in the EX button. � The preset station is erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the station again.
Storing your favorite station in to the one-touch operation button (EX�extra)
You can preset an FM or AM station (such as your favorite station or traffic announcement station); and recall it by one touch operation even if the unit is turned off. Ex.: Storing an FM station of 92.5 MHz in to the one-touch operation button (EX).
To tune into the favorite station
The unit automatically turns on (if it has been off). Your favorite station is tuned in�except when the tape is playing. � If you press the button again, the last received station will be tuned in.
