Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 4 (kliknij aby zobaczyć)
ENGLISH
RADIO OPERATIONS
Listening to the radio
1
3
2
1
/I/ATT
Turn on the power.
Note on One-Touch Operation: When you select a band in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.
2
FM
FM1 FM2 FM3
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3 to listen to an FM station.
FM1 and FM2: 87.5 - 108 MHz FM3: 65 - 74 MHz
AM
AM
Note: When a cassette is in the cassette compartment, you cannot select the tuner. Be sure to eject the cassette from the cassette compartment to listen to the radio.
3
To search stations of higher frequencies. To search stations of lower frequencies.
Start searching a station.
When a station is received, searching stops.
To stop searching before a station is received, press the same button you have pressed for searching.
To tune in a particular frequency manually:
1 Press FM or AM to select the band. 2 Press and hold or until �M� starts flashing on the display. Now you can manually change the frequency while �M� is flashing. 3 Press or repeatedly until the frequency you want is reached. � If you hold down the button, the frequency keeps changing (in 50 kHz intervals (87.5 - 108 4 MHz), in 30 kHz intervals (65 - 74 MHz) for FM and 9 kHz intervals for AM � MW/LW) until you release the button.
