Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 41 (kliknij aby zobaczyć)
Using the Features To change channels/programs in the PIP window � Use the yellow PIP CH+/- button to scroll through the TV
channels.
�
Use the yellow TV/VIDEO button to cycle through your other video equipment connected to the TV, such as your VCR, DVD player or Satellite Receiver.
Setups that affect your ability to use PIP � Any video equipment you have connected to the AUX input
z Be sure to label your
cannot be viewed in the PIP window.
�
video sources to make them easier to find in the Display. See �Video Label� on page 47 for labeling instructions.
�
If you are viewing all channels through a cable box, the PIP feature will not work. The cable box only unscrambles one signal at a time, so the window picture will be the same as the main picture. You can use PIP to see pictures from different sources on your TV. For example, you can have a regular (CATV) channel and the output from a VCR or DVD player or satellite receiver on screen at the same time using PIP. To do this:
1 Connect the CATV cable to the UHF/VHF input on the back
of the TV.
2 Connect the peripheral (VCR or DVD player or satellite
receiver) to any of the VIDEO IN inputs on the the back of the TV.
3 Tune to one image in the main picture. 4 Tune to a second image in the PIP window.
You can then SWAP the images on the TV screen.
� You cannot use a signal from the AUX connection with PIP.
