jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
5-2. ADJUSTMENT METHOD
Item Number 00 This explanation uses V-Position as an example. 1. Select 00 VSH with the 1 and 4 buttons. 2. Raise/lower the data with the 3 and 6 buttons. 3. Select the optimum state. (The standard is IF for PAL reception.) 4. Write with the MUTING button. (The display changes to WRITE.) 5. Execute the writing with the - button. (The WRITE display will be changed back to SERVICE.) Use the same method for Items Number 00-99. Use 1 and 4 to select the adjustment item, use 3 and 6 to adjust, write with MUTING , then execute the write with -. Note : In WRITE , the data of all items are into memory. � As for V-FREQ, by searching the bolded screen V range with adjusting data. Note : For adjustment Items that have differnt standard data between 50Hz or 60Hz and novwel or wid, be sure to use the respective input signal ather adjusting.
00
VSF
1F
SERVICE 50
GREEN
Adjusted with [3] and [6] buttons
00
VSF
1F
WRITE 50
GREEN
Written with [MUTING]
00
VSF
1F
WRITE 50
GREEN The WRITE display then the display returns to a green SERVICE.
