Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 29 (kliknij aby zobaczyć)
4 5
Play back the external component.
To operate the external components, refer to the manuals for the connected components.
Select the external component and adjust the volume on the car receiver.
To check the current input source
On the monitor: Press the Power button ( ) once. On the remote: Press the MODE button once. The on-screen display appears for about 5 seconds.
Monitor
MODE
Remote
To turn off the power
On the monitor: Press and hold the Power button ( ). On the remote: Press the Power On/Standby button ( ).
Monitor Remote
When you use JVC FM modulator KS-IF200
Selecting the RF signals to the receiver
You can listen to playback sounds from the external component through the receiver even if it is equipped with no line input. � Refer also to the instructions of KS-IF200. When KV-C10 is connected: Press the RF button on the remote controller. Each time you press the button, �RF ON� and �RF OFF� alternate and the sounds you hear through the car speakers change accordingly. RF ON RF OFF : Select to listen to the sound of the external component. : Select to listen to the radio (through the receiver).
