PANASONIC KXTCD510NZ
Instrukcja Obsługi

Base Unit Settings
Selecting the Recall Time You can change the duration of the recall time depending on the requirements of your telephone company or PBX.
Follow steps 1 to 4 of Call Options on the previous page, then:

5 Select �Recall�.

6 Select �Type

1� (100 ms), �Type 2� (600 ms) or �Type 3� (200 ms).

� The factory preset is �Type 2� (600 ms).

Selecting the Pause Time You can select the pause time to 3 or 5 seconds, depending on your PBX requirements.
Follow steps 1 to 4 of Call Options on the previous page, then:

5 Select �Pause

Time�.

6 Select �Short� (3 sec.) or �Long� (5 sec.).

� The factory preset is �Short�.

Setting the Emergency Calls With the handset in Call Bar Mode, you can still make an emergency call.
Follow steps 1 to 4 of Call Options on the previous page, then:

5 Select �Emergency

Call�.

6 Select �Emergency

Call1� to �Emergency Call5�.

7 Enter Emergency Call Number.

8 Press JOYSTICK.

� The factory preset is 111, 911 and 999. NOTE: The factory preset Emergency Call numbers are stored in the first 3 �Emergency Call� locations, it is recommended that you do not overwrite these numbers.

46