Automatic Answering Operation
When the unit answers a call, a greeting message is played and the caller�s message is recorded. � The total recording time of all messages (greeting and incoming) is about 15 minutes. If messages are recorded in noisy rooms, the time may be shortened by up to 3 minutes. � To select the caller�s recording time, see page 20. � A maximum of 64 messages (including greeting message) can be recorded.
Setting the Unit to Answer Calls Base Unit
Press [ANSWER ON] to turn on the Answering System.
� The indicator lights and the unit announces �Answer set� and current day and time. If �Answer set. Set time� is heard, set the date and time (p. 14). � The unit will announce the remaining recording time if it is less than 3 minutes. � When no recording time is available, you will need to erase any unnecessary messages before new messages can be recorded (p. 54). [ANSWER ON] and Indicator The unit can indicate that memory is full in the following ways: � � FULL � will flash on the base unit and the ANSWER ON indicator will flash rapidly until you erase a message. � The unit will announce �Memory full� when you press [ANSWER ON] or [GREETING REC], and after playing back messages or recording a message. � If you do not want the unit to answer calls, press [ANSWER ON] again to turn off the Answering System. The indicator light goes out and �Answer off� is heard. � You can also turn on the Answering System remotely from an outside phone (p. 58). � If you subscribe to Caller ID (p. 27), Caller ID information automatically adjusts the date and time when a call is received, provided you have already set the date and time manually (p. 14).
Answering System
Handset 1 Press [MENU]. 2 Press Select at �Message play�. 3 Press [8] to turn on the Answering System.
� �Answer set� is heard.
4 Press [OFF].
� To turn the Answering System off, press [0] in step 3. �Answer off� is heard. For assistance, please call: 1-800-211-PANA(7262)
