PANASONIC KXTG2388B
Instrukcja Obsługi

Making/Answering Calls
The handset will not make announcements, when: L the Name Announcement is turned off L the Answering System is in use L the handset has lost communication with the base unit L the base unit is announcing L the base unit is making an outside call. To put a call on hold {REDIAL} {SP-PHONE} VOLUME and Indicator {<}, {>} MIC

Using the base unit
{HOLD/CONF}

1 2

Press {HOLD/INTERCOM} during a conversation. L �Line on hold.� is displayed. Press {HOLD/INTERCOM} again. L �Hold� is displayed. L You can search the caller list or phonebook while a call is on hold. To exit the list, press {OFF}. The call will remain on hold.

1

Press {SP-PHONE}. L The SP-PHONE indicator lights. L �BC� displays.

2

Dial a phone number. L The base unit announces each button you press, including {1} to {0}, {*} (�Star�), {#} (�Pound�), and {FLASH/ CALL WAIT} (�Flash�).

To return to the call, press {C} or {s}. Note: L The base unit user can also take the call by pressing {SP-PHONE}. L If another phone is connected on the same line (page 8), you can also take the call by lifting its handset. L If a call is kept on hold for 6 minutes, an alarm tone will start to sound and the Ringer/Message Alert indicator will start to flash rapidly. After 4 additional minutes on hold, the call will be disconnected.

3 4

When the other party answers, talk into the MIC (microphone). To hang up, press {SP-PHONE}. L The indicator light goes out.

Note: L To switch to the handset while using the base unit speakerphone: � If the handset is off the base unit or charger, press {C} or {s} on the handset, then press {SP-PHONE} on the base unit. � If the handset is on the base unit , just lift up the handset. L If the Base Unit Talking Keypad is turned off (page 44), the base unit will not announce the entered number.

18

For assistance, please visit http://www.panasonic.com/consumersupport