Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 23 (kliknij aby zobaczyć)
Operating Instructions
Starting the washing programme
0 1. Check that the water tap is open.
2. Start the washing programme: Press the START/PAUSE button The washing programme is started or starts at the end of the time delay set.
3
If the DOOR display flashes red when the START/PAUSE button is pressed, the door is not properly closed. � The display DOOR flashes red � The error code E40 then flashes in the multi display � And the MAIN WASH display flashes. In this case, press the door firmly closed and again press the START/PAUSE button. If the delay timer has been set: The start time delay set on the time delay counts down; the time remaining until the programme starts is displayed in the multi-display (in hours remaining, e.g. 5h). During this time you can add washing and change or stop the delay timer. � Load the washing: Press the START/PAUSE button. The door can be opened. Then close the door and press the START/PAUSE button again. � Changing or stopping delay timer: Press the DELAY TIMER button repeatedly until the desired time is displayed. When the programme duration is displayed (display in minutes e. g.126) the washing programme starts without delay.
