Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 4 (kliknij aby zobaczyć)
Starting
Before starting your washer:
your washer
1. Measure and add detergent. 2. Place sorted load in washer. 3. Start washer. FILL AREA-
l
Select WATER 1. TEMPERATURES
l
Match the wash water temperature to the type of fabrics and soils being washed. All rinses are cold. Cold rinses save energy and help prevent wrinkles from setting into fabrics.
Recommended wash temperatures can be found in your �Laundry Guide� and printed under the washer lid.
2.
Select
CYCLE
and WASH
TIME;
Start
the washer
Push in the Control Knob and turn it to the right. It must be pushed in and turned only clockwise.
A.
4
B. Stop on a number in the cycle you want. The numbers are minutes of wash time. The drawing shows 8 minutes of agitation in the REGULAR HEAVY Cycle. NOTE: In the REGULAR HEAVY and SHORT Cycles, the washer will fill only when the knob points to a �fill� area (shaded in drawing).
