Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 4 (kliknij aby zobaczyć)
Starting
Before :--/ 9 starting
your washer
your washer:
; 1. Measure and add detergent. 2. Place sorted load in washer. 3. Start washer. DO NOT OVERLOAD WASHER See pages 6 and 7 in your �Laundry Guide:�
Select 1. LOAD
a SIZE
mm TEMPERATURES
9 Turn the knob to point at a setting that describes the size of load you want to wash. l Set the knob on EX SMALL (a few items) or LARGE (a full load). NOTE: Use the LARGE water level for best permanent press results.
l
l
Match the wash water temperature to the type of fabrics and soil being washed. All rinses are cold. Cold rinses save energy and help prevent wrinkles from setting into fabrics.
DO NOT LOAD ABOVE CLOTHES GUARD
LOAD
SIZES
AND
WATER
LEVELS
$
For best cleaning results, the load must be able to move freely in the water. Too big a load or too little water can tear items. IMPORTANT: The EX SMALL setting in the REG/HEAVY Cycle may cause water to splash over the tub. If this happens, move the Load Size Selector to a higher water level. (9.5 galsJ36.0 �Approximate fill with load. L)*
