Operatinglnstmctions
Starting your washer
Be sure to measure and add detergent, then place a sorted bad in the washer before starting it.
l.Selectaloadslze
Turn the knob to point at a setting that describes the size of bad you want to wash. l Set the knob on SMALL (a few small items), MEDIUM or LARGE (a full bad). NOTE: For best washing results, items should move freely in the washer. Do not overload the washer or choose a water level that is too bw for your wash bad. For best results with permanent press clothes, use the LARGE water level. Reduce wash time when using the SMALL water level setting. Loads with only a few small items need less wash time for best results.
l
WAllEn uwa IBADmauaclwn
2. Select water temperature
Match the water temperature to the type of fabric and soils being washed. l The top temperature is the wash selection and the bottom temperature is the rinse selection. NOTE: Use warm wash water with the PERMANENT PRESS or SHORT cycles. For heavily soiled permanent press or knit dothes, prewash or pre-soak before washing in warm water. ALWAYS use cold rinse water for permanent press fabrics.
l
