WHIRLPOOL LA9300XYG0
Instrukcja Obsługi

3. Select cycle and wash time Start the washer l Push in the Cycle Control Knob and turn it cbckwtse. l Stop when the indicator on the knob�s outer ring points to the number in the wash cycle you want. The numbers are minutes of wash time. l Start the washer by pulling out the Cycle Control Knob. The washer will fill to the selected water level with the selected wash water temperature. The washer will bsgin agftating immediately after filling. Agitation can occur with the washer lid up or down. l To stop the washer at any time, push in the Cycle Control Knob. To restart the washer, pull out the Cycle Control Knob.

M/h;; happensin each
Each cycle has been designed for different kinds of fabrics. When the Cyde Control Knob is set to a number and pulled out, the washer fills before agitation and timing starts. After agitation starts, the knob turns clockwise until it points to OFF and the cycle ends. The washer will pause briefly throughout each cycle. These pauses are normal for washer operation. Gentle Wash System For better fabric care in the REGULAR and PERMANENT PRESS cycles, the agitation speed is reduced during the last few minutes of wash agitation time.