10. When the program is over
Your washing machine is equipped with an automatic safety device preventing the opening of the lid while the washing machine is operating. It is normal to hear a noise of a mechanical locking due to the drum positionning (high position) : the light DPS lights on. However, you can open the lid only when the light END OF CYCLE will light. Programs finish with: a spin (for all washing programs) if you have not selected the RINSE HOLD button. a rinse hold (for all washing programs) if you have selected the RINSE HOLD button. The on/off light blinks. You can then finish these programs either with a spin by pressing on the on/off button.or by a draining by putting the timer on the DRAIN position, then press on the on/off button. At the end of these sequences of the program, the light END OF CYCLE lights on. At the end of the cycle, put the timer on the STOP position " " ; the appliance is switched off. Remove the laundry. Full the mains plug out and close the water supply tap. Make sure that the drum is empty; any fabric that remained inside could be damaged in the next wash (shrinkage) or it could lose its color onto other items of washing. Note: We recommend that you leave the cover and the drum open after use in order to air the tub.
