WHIRLPOOL LBR1121EW1
Instrukcja Obsługi

Washer Safety
Your safety is important to us.
This guide contains safety statements under warning symbols. Please pay special attention to these symbols and follow any instructions given. Here is a brief explanation of the symbol. This symbol alerts you to hazards such as fire, electrical shock, or other injuries.

IMPORTANT SAFETY INSTRUCTIONS WARNING � To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following: �Read all instructions before using the washer. �Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances as they give off vapors that could ignite or explode. �Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode. �Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using a washing machine, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time. �Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children. �Before the washer is removed from service or discarded, remove the door. �Do not reach into the washer if the tub or agitator is moving. �Do not install or store the washer where it will be exposed to the weather. �Do not tamper with controls. �Do not repair or replace any part of the washer or attempt any servicing unless specifically recommended in this Use and Care Guide or in published user-repair instructions that you understand and have the skills to carry out. �See Installation Instructions for grounding requirements.

� SAVE THESE INSTRUCTIONS �
3