...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 8 (kliknij aby zobaczyć)
LC-15A2U
DISASSEMBLY OF THE SET
1. Insert your finger into the center of the terminal cover and pull it toward you to detach the terminal cover. 2. Remove the four screws 1 and one screw 2. 3. Open the cabinet B by approx. 45� from the bottom of the cabinet (stand side). 4. Remove the lead wire from the cable clamp 3. 5. Remove the power connector 4. 6. Remove the connector 5 from the light reception unit. 7. Remove the lead wire from the cable clamp 6. 8. Remove the speaker connector 7. 9. Remove the FFC from the FFC connector 8 on the main PWB. 10. Remove the connector 9 from the switch PWB. 11. Remove the right and left speaker connectors 0 on the terminal PWB. <<Disassembly of the main PWB>> 1. Disconnect the flexible cable connectors q and w from the LCD panel. 2. Disconnect the cable connectors e and r from the fluorescent lamp. 3. Remove the four screws t. <<Disassembly of the terminal PWB>> 1. Remove the cover u. 2. Remove the five screws y. 3. Remove the two screws i. Take them out of the cabinet holes.
<<Cabinet A side>>
Cabinet A
CCABA2402CE02
<<Cabinet B side>> Terminal Cover GCOVA1858CEKA
Hinge Cover Rotation Cover
GCOVA1853CESA GCOVA1854CESA Cabinet B CCABB2288CE01
