|
|
|
Kto jest w sklepie?
Sklep przegląda 5967 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
 ;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
LC-20B6E
PUBLIC MODE SETTING PROCEDURE
1. How to start Public Mode
1.1.There are the following two ways to get the public mode setup screen displayed. 1.1.1.In the adjustment process mode, turn on �PUBLIC MODE�. Switch off the TV set and pressing [CH UP] and [VOL+] keys on the set at once, turn on the power. 1.1.2. � Press the [INPUT] and [VOL+] keys on the set at once and turn on the power. � Get the password input screen displayed. 1.2. Procedure password input � The input starts with the leftmost digit. � Use the numeric keys [1] thru [9] and [10/0] keys on the remote controller. The other keys are not acceptable. � With a numeric-key input, ��� will change to � �. The input position will move one digit to the right. � With all the 3 digits entered, the password will be verified.
*
___
*
__
***
� The 3-digit password is now verified. The password [0] [2] [7] provides for the public mode screen. (This screen comes on with whatever adjustment process settings.) With any other passwords, the screen changes to the normal mode.
2. How to exit Public Mode
There are the following ways to quit the public mode setup screen. �Turn off �PUBLIC MODE� in the adjustment process mode. # This way alone is not for quitting the setup screen, but for quitting the mode itself. � Turn off the power with the power key. ( !) � Select �ENTER�. (! ) � Move the cursor to �RESET� and press the �FLASHBACK� key. (Back to the normal mode screen)( ! ... �PUBLIC MODE� stays on in the adjustment process mode. ... The settings will be back to the factory ones.
)
3. Public Mode Setting Values
� With the factory settings made, the public mode settings get initialized. (The adjustment process remains intact.)
4. Public Mode Menu
The guidance is not displayed on screen. Setup procedure � To move the �CURSOR UP AND DOWN�, use the �CURSOR UP/DOWN� key (remote controller) and �CHANNEL UP/ DOWN� key (remote controller and set). � To change the settings, use the �CURSOR RIGHT/LEFT� key (remote controller) and �VOLUME UP/DOWN� key (remote controller and set). � To save new settings, keep the cursor at �ENTER� and use the �CURSOR RIGHT/LEFT� key (remote controller) and �VOLUME UP/DOWN� key (remote controller and set).
21
|
|
|
> |
|
