Removing the speakers This unit has detachable type speakers.
You can detach the system speakers when using external amplifier/speakers. Before detaching (or attaching) speakers, unplug the AC cord from the AC outlet.
Before attaching/detaching speakers
� Before performing work, make sure to turn off the System. � Before performing work, spread cushioning over a flat surface to lay the Display on. This will prevent it from being damaged.
1
2
Speaker plug
3
Unfasten the screws used to secure the speakers in place.
Take hold of the speaker and slowly slide it sideways. (The speaker plug is still inserted, so make sure not to pull the speaker too far.)
Remove the speaker plug from the terminal on the Display. (Do not remove the plug by pulling the cord.) Now the speaker can be detached from the Display.
CAUTION � The speaker terminals on the Display is only for the attached speakers. Do not connect any third party plug or speaker to the terminal. � Insert the speaker plug completely into the terminal. � Do not handle or move the Display by the speakers.
NOTE � Perform the same steps for both left and right speakers. � To attach the speakers, perform the above steps in reverse order.
