Selecting the cable box brand name. Press a/b to select the cable box brand, and then press ENTER.
11
Do you have an antenna connected to your TV? Press a/b to select �Yes� or �No�, and then press ENTER.
� Press a/b to view more cable box brands.
9
Tune your cable box to channel 02. Make sure to leave your cable box turned on, and then press ENTER.
� If you select �Yes�, go to the next step. � If you selected �No� in step 3, you must connect an antenna to your TV and select �Yes� to receive a channel lineup and listings.
12
Are the settings correct? Confirm the settings displayed on the screen and press a/b to select �Yes, end setup� or �No, repeat setup process�, and then press ENTER.
The TV Guide On Screen system will conduct a series of tests and when the testing is completed the next screen will be displayed automatically. Do not press any buttons while testing is in progress. Press ENTER to continue.
10
Is your cable box now tuned to channel 09? Press a/b to select �Yes�, �No� or �Test this code again�, and then press ENTER.
NOTE
� Please do not use the CableCARD while using cable box.
� If you select �Yes�, go to the next step. � If you select �No�, a different code is tested in the previous screen. � If you select �Test this code again�, the same code is tested again in the previous screen.
