Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 11 (kliknij aby zobaczyć)
OPERATING YOUR DRYER
CYCLE DESCRIPTIONS (CONT.)
Damp Dry feature
Use the Damp Dry feature in the Timed cycle to dry items to damp level or to dry items that do not require an entire drying cycle. Two examples Damp are heavy cottons, such Dry as jeans, which you do
Tumble Press
FINISH GUARD® feature
(on some models)
When you are unable to remove a load from the dryer as soon as it stops, Off wrinkles can form. The FINISH GUARD feature Finish Guard periodically tumbles, rearranges, and fluffs the load to avoid wrinkles. � If you do not open the dryer door within a few minutes after the cycle stops, the FINISH GUARD feature automatically
Option
20
Cool Down
not want to become stiff, or cotton clothes which are easier to press when damp. Set the Temperature selector to High heat.
Off
Towels feature
(on some models)
When you have large loads of towels to dry, you may want to use the Off Towels feature in the Automatic cycle. The Finish Guard Towels setting allows for more drying time Cool Down and automatically shuts Less off the dryer when the Dry
Option
takes over to protect the load. � On some models, you can turn the FINISH GUARD feature On or Off with a selector. (See Step 5 in �Starting Your Dryer.�) � A signal will sound every few minutes while FINISH GUARD is running if the Cycle Signal (End of Cycle Signal) feature is set to On. On some models, this signal is fixed and cannot be turned off. The signal and cycle end when you open the dryer door.
selected dryness is reached. The Towels Very Dry feature also can be Towels used for extra heavy items such as mattress pads and quilts. Set the Temperature selector to High heat.
TUMBLE PRESS® feature
The TUMBLE PRESS feature in the Timed cycle removes wrinkles from clothes that have been packed in a suitcase or closet, or from items not removed from the dryer at the end of a
Tumble Press
20
Cool Down
Off
cycle. As soon as the dryer stops, fold or put the items on hangers. Set the Temperature selector to Medium or Low heat.
