LINN LP12
Instrukcja Obsługi

T

is impossible, the deck may be taken by the customer. In this case, the outer platter must be

RANSPORTATION If installation by the retailer

removed and placed in the bottom packing tray and the inner platter removed and placed in the top tray. The counterweight should be removed from the arm. The deck should be pre-packed in it�s original packing�, with the arm and cartridge removed, when it has to be shipped anywhere. Under no circumstances should the deck be shipped with the arm fitted to the turntable. The red bearing cap should be fitted to prevent oil spillage see diagram of the packing assembly.

� Note: When re-packing the turntable, remove the two bottom cover screws, which

are located between the turntable feet. If these screws are left in position during shipping, they will damage the rim of the platter.