PANASONIC L-RS014150PP VOLUME 1
Instrukcja Serwisowa

L-RS014150PP / L-RS014150E

5.2.3.

Removal of the Lens Mount U

5.2.4.

Removal of the Decoration Ring

--- WHEN DISASSEMBLING / ASSEMBLING ---*.When removing and installing the "Screw (B)", use a VFK1390. Otherwise, Lens Mount u may be damaged. --- WHEN ASSEMBLING ---*.When assembling, do not reuse screws (D). (Use new one.) *.Tighten the 4 screws (C) and (D) in numerical order.

--- WHEN DISASSEMBLING ---*.Since the Decoration Ring which is stick on Lens Ring Front, Apply the heating air using Hair dryer. *.Peel off the Decoration ring by inserting the minus-driver between the Decoration Ring and Lens Ring Front. (Be careful not to damage the surface of the lens and/or Lens Ring Front.) --- WHEN ASSEMBLING ---*Do not use the removed (Used) Decoration Ring. Use new one. *.Peel off the Decoration Ring from the separator sheet. *.Stick the Decoration Ring to the Lens Ring Front that concave part to be toward the "X" direction. *.Press the Decoration (RFKZ0423) Ring with Name Ring Fixture

12