Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 13 (kliknij aby zobaczyć)
8. At the end of the programme
The machine stops automatically. If you have selected a programme which ends with the water of the last rinse in the tub, drain the water before opening the door by selecting programme (drain) or (drain and short spin). The door is controlled by a safety device which releases 2 minutes after the end of the programme. Switch the machine off by pressing the ON/OFF button . The mains-on light goes out. Remove the laundry from the drum and carefully check that the drum is empty so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites. If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.
Automatic washing and drying (NONSTOP programme)
Warning! For NON-STOP programmes, it is also essential not to exceed the maximum load sizes of 2.25 kg for cotton and 1.5 kg for synthetics. 1. Load the laundry. 2. Add detergent and additives. Do not use dosing device/ball when carrying out a NON-STOP programme. The plastic material with which it is made cannot withstand the high temperature in the drum during drying. 3. Select the wash programme. If possible, do not press the spin reduction button to avoid a too long drying time so saving energy. 4. Select the drying time. 5. Start the programme by depressing the ON/OFF button. 6. At the end of the programme press the ON/OFF button again to switch the machine off. 7. Remove the laundry
Drying only
Warning! Do not exceed the maximum laundry loads: - 2.25 kg for linen and cottons - 1.5 kg for synthetics. The water tap must be open and the drain hose must be positioned in the sink or connected to the drain pipe. 1. Load the laundry 2. Select the drying programme synthetics. for cotton or for
3. Select the drying time in the red or black section of the selector, according to the fabrics (cotton or synthetics) to dry. 4. Press the ON/OFF button programme. to start the
5. At the end of the cycle press the ON/OFF button again to switch the appliance off. 6. Remove the laundry.
