Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 142 (kliknij aby zobaczyć)
[5] Lower the roller holder assy and push the set buttons in the direction of the arrows to lock the roller holder assy in position.
Fig. 6.2-5
Replacing the Cartridge 5
[6] Close the top cover.
Fig. 6.2-6
Replacing the Cartridge 6
[7] Turn on the power switch and press the Feed key to feed out some sheet and remove the slackness in the sheet. Hold down the Feed key until the edge of the sheet reaches the eject gate. [8] Press the Cut key to cut off the end of the sheet fed out to remove the slackness.
