Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 13 (kliknij aby zobaczyć)
Adjusting the Picture
Contrast and Picture Sharpness
Press the . then the button. The "GRUNDIG Infocenter" is displayed. The "Picture-menu" line is marked in red. Press the
Brightness and Colour Contrast
Press on the � or + side of the corresponding rocker button (v, i) until the desired value is reached. Brightness with the
O
O button.
Picture-menu
® button. Colour contrast with the � button.
Corresponding scales are displayed on the picture screen. The changed value is indicated. The last set value for Sharpness, Tint, contrast, colour contrast, Sharpness, Tint and brightness is automatically stored in memory by: switching from a normal to the AV programme position; switching from one AV programme position to another; switching to standby; switching off with the mains switch. The values are checked before storing. If they have been reduced in such a degree that a reasonable picture impression is no longer obtained, the factory-preset settings (optimum values) will reappear when switching the set on again.
The "Picture-menu" is displayed.
Contrast Sharpness Select Terminate
�
Change
<>
Select "Contrast", "Sharpness" or "Tint" by pressing the | or ] button. The "Tint" value can only be adjusted with NTSC standard broadcasts. Correct the setting by pressing the x or c button.
This television was tested with maximum contrast to verify the reliability of all components. It is advisable to turn down the contrast to offer you the best picture quality depending on lighting conditions or on the location where your TV is set up.
